Quick Ship Section Coming soon for every firearm manufacturer.
Definitions
Holster Types and Terms
Common Holster Descriptions
IWB
IWB is an acronym for the term "Inside The Waistband" It is worn on the inside of your pants.
OWB
OWB is an acronym for the term "Outside the Waistband" It is worn on the outside of your pants via a belt.
AIWB
AIWB is an acronym for the term "Appendix Inside the Waistband. They come standard with a claw and are meant to be worn between 11-12 for left hand and 12-1 for right hand shooters
Thigh Rig
Starting at $120
The Name Thigh Rig is simply where the holster is mounted. We use a G-Code System which allows use of any holster with a RTI Plate and a G-Code Base.
G- String
Starting at $20
The G-String is a holster that only covers the trigger guard of a firearm. Comes with adjustable retention and a lanyard. Good way to carry in a purse without a bulky Holster.
The Wedge
Starting at $50
The Wedge is something incorporated into the IWB Holster. What it does is it props the muzzle out passed the controls of the firearm so it sits more flat under your clothes.
Pocket Holster
Starting at $40
The Pocket Holster is exactly how it sounds.
It can be worn either left or right pocket and it incorporates a hook built into the holster. as you grab the firearm and pull from your pocket, the hook grabs the inside of your pocket and allows the firearm to come out and the holster to drop to the floor.
Cant / Canted
Cant is the tilt of the gun as it sits on your person. Forward cant would be the handgun tilted forward in front of you. No cant would be straight up and down. We offer no cant, cant, and adjustable cant (+$5)
Sweatshield
The Sweatshield is the amount of Holster material that accompanies the firearm up to the rear sight. Full Sweatshields are always recommended on IWB Holsters. They prevent sweat from entering the firearms holster or contacting the firearm itself and to help prevent clothing from entering the holster while reholstering. We offer Full, 1/2 and no Sweatshield at no extra cost
RMR Cut
RMR cut is adapting the holster to work with a reflex red dot sight. RMR cuts are cut from the ejection port to the end of the Sweatshield. They are of no cost to incorporate into your holster
Light Bearing
+$10
Light Bearing are holster that incorporate a weapons mounted flashlight on the holster.
If a holster is made with a weapons light, a pistols without a light will NOT work with a light bearing holster.
Strong Hand
Strong Hand means what side you want your holster on. If youre Right handed or Left handed
Retention
The amount of force clamping on the firearm. All Holsters come with adjustable retention so you the user can adjust to your liking.
The Claw
The Claw which is used in AIWB rigs. Is designed to add a deeper concealment. The claw rides in line with the belt. and when you tighten your belt it rotates the firearms grip into your body for less printing.
Holster Parts and Options
Pancake Loops
Pancake loops are a wonderful option as they allow the owb holster to sit close and tight to the body. Use with a pancake style of holster (two piece) and these come in both 1.5 inch and 1.75 inch belt Photo courtesy of www.holstersmith.com
MOLLE
MOLLE Clips are used to mount holsters and gear to your MOLLE vest and plate carrier.
They come in a variety of sizes. The utilize a spring locking rod at the bottom of the mount.
FOMI Clip
Which stands for Fold Over Mold Injected Clip is what is used on IWB Holsters. It is the device that attaches the kydex holster to your pants/belt. These clips Come in 1.5 and 1.75 inches wide, which represents the width of your belt.
Speed Clips
Speed Ease Clips or Speed clips are used for OWB Holster options and are used for the sole purpose of quick on and quick off. These are recommended for lighter handguns although still work with the heavier ones.
Paddle
The Paddle, made by Bladetech is an attachment for OWB Holsters to allow a use to carry without the use of a belt. Although a belt is always preferred. These rigs are quick on and off as well and disperse weight through the large paddle section. The also have adjustable cant built right into them.
Belt Loops
We use BDC belt loops, they come in 1.5 or 1.75 width for the belt. They are used to attach the OWB Holster to your person via a belt. The belt runs through them and creates are strong anchor for a holster
Combat Loops
Combat loops are a hinged and locking attachment. Its an easy on off and for use with OWB holsters. it allows whatever your carrying to be able to be carried at vertical or horizontal positions. It also allows you to lock the clip so you dont have an accidental opening. Clip can fit belts ranging from 3/4" to 2 inches in width. Photo courtesy of www.holstersmith.com
Tek Lok
Tek Lok Dutys are a hinged and locking attachment. Its an easy on off and for use with OWB holsters. it allows whatever your carrying to be able to be carried at vertical or horizontal positions. It also allows you to lock the clip so you dont have an accidental opening. Clip can fit belts ranging from 1.25" to 2.25 inches in width. Unlike the Combat Loop, this Mount features a combination of movements to unlock. Swing out locking jaw, pinch and lift. Photo courtesy of www.holstersmith.com
Spetz Gear Speed Lock Hood
This hood is used on level 2 hoods. The Speed lock hood requires a thumb rest to be articulated reward for the hood to spring forward, allowing you to remove the firearm. Photo courtesy of www.holstersmith.com
WRS Hood
This hood is used on level 2 hoods. The WRS hood requires a thumb rest to be articulated toward the body for the hood to spring forward, allowing you to remove the firearm. Photo courtesy of www.holstersmith.com
RTI 33
The RTI Plate is used in conjunction with the RTI wheel. RTI meaning Rapid Transition Interface, allows you to quickly attach and detach any holster using a rti plate to any plsatform with a rti wheel. The 33 Plate sits slight rearword on the platform. Photo courtesy of www.holstersmith.com
RTI 34
The RTI Plate is used in conjunction with the RTI wheel. RTI meaning Rapid Transition Interface, allows you to quickly attach and detach any holster using a rti plate to any plsatform with a rti wheel. The 34 Plate sits slight forward on the platform. Photo courtesy of www.holstersmith.com
RTI 35
The RTI Plate is used in conjunction with the RTI wheel. RTI meaning Rapid Transition Interface, allows you to quickly attach and detach any holster using a rti plate to any plsatform with a rti wheel. The 35 Plate sits centered on the platform. Photo courtesy of www.holstersmith.com
DCC Monoblock
The DCC Monoblock is a stamped piece of spring steel with a very aggressive hook under for a very secure hold on the belt. Photo courtesy of www.holstersmith.com
Rubber Loops
Dual rubber loops replacing the fomi clip is a wonderful upgrade for a holster. The rubber loops are fitted with a pull the dot system to secure it to itself. Simply route the loop under then over your belt and simply snap in place. Photo courtesy of www.holstersmith.com
Ulti Clip
The Ulticllip is a great way to mount your holster if you dont wear belts. If you wear scrubs, basketball shorts or just loose clothing, the ulticlip clips to itself through your article of clothing. Photo courtesy of www.holstersmith.com
Ulti Clip Ulti Tuck
The Ulticllip is a great way to mount your holster if you dont wear belts. If you wear scrubs, basketball shorts or just loose clothing, the ulticlip clips to itself through your article of clothing. Only difference is the Ulti Tuck is a little smaller profile than a FOMI. Photo courtesy of www.holstersmith.com
Fabriclip
The Fabriclip is a wonderful alternative to the ulticlip. Its injection molded body clips to itself over fabric. little bit of a lighter option. Photo courtesy of www.holstersmith.com
Material Colors
Carbon Fiber
Carbon Fiber Material mimics real carbon fiber with an inlay molded on the toip side while forming. NOTE this is not real carbon Fiber. We wish though. Photo courtesy of www.holstersmith.com
Basket Weave
Basket Weave mimics the old Leather basket weave design except its on kydex! Old school look with new school strength.
Photo courtesy of www.holstersmith.com
Raptor
Raptor material mimics reptile skin. It makes boring kydex look like a nice leather but with the functionality of kydex.
Photo courtesy of www.holstersmith.com
Add a footnote if this applies to your business
